Temporary Fence Stays: Standard or Reinforced?
What a temporary fence stay does, how many a fence line needs, and when to choose Standard or Reinforced bracing for each side of an Adelaide site.

BoltHire Team
A stay is the brace that stops a temporary fence line from blowing over. On BoltHire you choose one of two bracing levels for each side of the fence. Standard puts in one stay for about every 6 panels. Reinforced puts in one for about every 3 panels.
This page explains what a stay does, how to pick the level for each side, and where the stays go on your site. For the engineering behind wind load, read the temporary fence wind rating guide. This page is about the choice you make when you draw the line.
Stays at a glance
- What it is: a brace that runs from the fence down to the ground on one side of the line.
- Standard bracing: one stay for about every 6 panels, roughly every 14.4 metres of fence.
- Reinforced bracing: one stay for about every 3 panels, roughly every 7.2 metres of fence.
- Set per side: you choose Standard or Reinforced for each side of the line on the map. One side can be Reinforced while the others stay Standard.
- Corners: no extra stay at a corner. The count follows the length of each side.
- Price: stays are part of the installed price, and the plan shows them on the line before you pay.
What a stay does
A temporary fence has no footings. Each panel stands in a foot that sits on the ground, and clamps join the panels into one line. That is what makes the fence quick to put up and take away. It also means the line is held down by weight, not by anything set in the ground.
Wind pushes on the mesh. On a long straight side, that push adds up along the whole line. A stay gives the line a second point of contact with the ground, on one side, so the push goes into the ground instead of tipping the panels.
When a temporary fence goes over, the panels are usually fine. What failed was the bracing. That is why the bracing level is worth thinking about before the fence goes in, not after the first windy afternoon.
Standard bracing
Standard bracing is one stay for about every 6 panels. It suits sides where the wind has less to work with:
- sides with buildings, walls or an existing fence close by;
- shorter sides broken up by corners;
- inside runs, such as a line that separates a work area from the rest of a yard.
Most sides on a typical house build or renovation start as Standard. If nothing will be attached to the mesh and the side is sheltered, Standard is the usual choice.
Reinforced bracing
Reinforced bracing is one stay for about every 3 panels, so twice as many stays along that side. Choose it where the wind load is higher:
- Exposed sides: an open frontage facing a road, a corner block, a side along open ground, or a site on a rise.
- Long straight sides: a long run with no corners or returns to stiffen it.
- Anything attached to the mesh: signs, banners, dust mesh or privacy cloth. Covering the mesh turns the fence into a sail. The guide explains why this is the most common reason a fence goes over.
- Soft or uneven ground: feet hold better on a firm, level surface than on loose fill or a slope.
If you are not sure about a side, look at what is on the other side of it. If it faces open air, choose Reinforced.

How to choose, side by side
When you draw the line on the quote, each side shows its own bracing setting. Walk the line in your head, one side at a time:
- What is next to this side? A building or wall shelters it. A road or open block exposes it.
- How long is it without a corner? Long, straight sides catch more wind.
- Will anything hang on it? Any cover on the mesh means Reinforced.
- What is it standing on? Firm and level, or soft and sloping?
You can change a side from Standard to Reinforced and back while you draw. The stays move on the plan and the price updates, so you see the effect before you pay.
Where the stays go
A stay takes up ground on one side of the fence. Plan for it:
- Put stays on the inside of the site where you can, so they are not in a footpath or a neighbour's driveway.
- Keep them out of the path trucks use to reach the vehicle gate.
- If a stay is in the way of access, move the access or the gate rather than the stay. If a stay has to come off during the day for a delivery, put it back before the site is left.
Do not take stays out to save space or money. Bracing is part of a safe fence, not an extra. Site safety duties sit with whoever controls the site, which is usually the principal contractor.
A worked example
Say a house site has an 18 metre frontage on a busy road and two 12 metre sides between neighbouring houses.
- Frontage: open to the road and long. A site sign will hang on it. Choose Reinforced: one stay for about every 3 panels.
- Two sides: short, with houses on the other side. Choose Standard: one stay for about every 6 panels.
The frontage carries most of the stays, which is where the wind load is. Draw the same line on the quote and the plan shows each stay on the map.
For how the panels, feet and clamps add up on the same line, see temporary fence panel sizes.
Frequently asked questions
How many stays does a temporary fence need?
On BoltHire, about one stay for every 6 panels with Standard bracing, and about one for every 3 panels with Reinforced bracing. You choose the level for each side of the line.
What is the difference between a stay and a foot?
A foot holds each panel upright where it stands. A stay is a separate brace that runs from the fence to the ground on one side, so wind cannot push the line over.
Do I need Reinforced bracing if I put shade cloth or a banner on the fence?
Yes. Covering the mesh makes the wind load much higher. Choose Reinforced for any side where something will be attached, and tell us what it is.
Can stays go on the outside of the fence?
They can, but inside the site is usually better. Stays on the outside can end up in a footpath or driveway, where they are a trip hazard for the public.
Does Reinforced bracing cost more?
It uses more stays, so the installed price is higher for that side. The price updates on screen when you switch, before you pay.
In short
A stay braces a temporary fence against wind. Standard bracing is about one stay every 6 panels and suits sheltered sides. Reinforced is about one every 3 panels and suits exposed sides, long straight runs and anything with a cover on the mesh. Choose the level for each side when you draw your line on the quote, or start from the temporary fencing hire page.
Done reading? Put a number on it.
Draw the line and see the installed price.

