Temporary Fence Panel Sizes, Feet, Clamps & Stays
How big is a temporary fence panel? The panel size BoltHire uses in Adelaide, and how the feet, clamps, stays and gates add up along a fence line.

BoltHire Team
A BoltHire temporary fence panel is 2.4 metres wide and 2.1 metres high. Each panel stands in a foot, joins the next panel with a clamp, and every few panels a stay braces the line against wind. Gates sit in the line like panels do.
This page explains each part, how many of each a fence line uses, and how the count changes at corners and gates. It does not cover wind engineering or council permits. Those have their own guides, linked below.
The parts of a temporary fence, at a glance
- Panel: 2.4 m wide × 2.1 m high, mesh.
- Feet: one at every point where panels meet, plus one at each open end. A straight run of 10 panels stands on 11 feet.
- Clamps: one at every join between two panels, and one extra at each corner.
- Stays: with Standard bracing, one stay for about every 6 panels. With Reinforced bracing, one for about every 3 panels.
- Gates: pedestrian or vehicle. Each gate takes the space of two panels (4.8 m) in the line.
These are the counts the quote uses when you draw a line on the map. You do not have to add any of them yourself.
The panel: 2.4 metres wide, 2.1 metres high
The width is the number that matters when you plan. Divide the length of your fence line by 2.4 and round up to the next whole panel. A 30 metre run is 30 ÷ 2.4 = 12.5, so it needs 13 panels.
You always round up because a panel cannot be cut. The last panel overlaps slightly or the line moves a little on site.
The height, 2.1 metres, is the standard construction height. It is tall enough that people cannot step over it, and it is the same on every panel, so a line looks even from the street.
Plan with the width of the panels that will actually be installed. Panel sizes are not the same across every supplier, and a small difference in width changes the count over a long line.
Feet: one more than the number of panels
Each panel's legs drop into a foot. The foot sits on the ground and holds the panel upright without digging.
Where two panels meet, they share one foot. So a straight line of panels needs one foot per join, plus one at each end:
- A run of 13 panels has 12 joins and 2 ends: 14 feet.
- A closed rectangle has no open ends, so it uses one foot per join.
You will see feet sitting slightly inside or outside the line. Keep them clear of footpaths where you can, because a foot sticking into a path is a trip hazard for the public.
Clamps: one at every join
A clamp locks two neighbouring panels together. Clamps are what turn a row of separate panels into one fence. Without them, a panel can be lifted out of its feet and the site is open.
The count is simple. There is one clamp for every join between two panels, and one extra at each corner where the line turns. The extra clamp holds the angle where the line turns.
If you walk a fence and find a join without a clamp, that is the weak point. Report it to whoever installed the fence.

Stays: bracing against wind
A stay is a brace that runs from the fence down to the ground on one side. Mesh catches some wind, and a long straight line of panels moves like a sail if nothing holds it.
When you draw a fence on the BoltHire map, you choose the bracing for each side of the line:
- Standard: one stay for about every 6 panels, roughly every 14.4 metres.
- Reinforced: one stay for about every 3 panels, roughly every 7.2 metres.
Corners do not get an extra stay; the count follows the length of each side.
Choose Reinforced for exposed sides, such as an open frontage facing a road or a site on a rise. Also choose it for any side where something will hang on the mesh, because signs and covers catch far more wind than bare mesh. The temporary fence wind rating guide explains how wind load works and why it matters.
Stays take up space on one side of the fence. Plan which side they go on, usually inside the site, so they are not in a footpath or a driveway.
Gates: two panels wide
A gate sits in the line where a panel would. On BoltHire, both the pedestrian gate and the vehicle gate take the space of two panels, which is 4.8 metres of the line.
A gate does not make the fence line longer. It replaces that stretch of panels. Put the vehicle gate where trucks already come in. Put a pedestrian gate on the path people actually walk, so they do not use the vehicle opening.
You place gates on the map as you draw, and the price includes them.
A worked example
Say you are fencing the front and two sides of a house site. The front is 18 metres and the two sides are 12 metres each.
- Panels: each side is counted on its own and rounded up. The front is 18 ÷ 2.4 = 7.5, so 8 panels. Each side is 12 ÷ 2.4 = 5 panels. Total: 18 panels.
- Gate: one vehicle gate on the front takes two of those panel spaces.
- Feet: the line has two open ends, at the back of each side, so it uses one foot per join plus two.
- Clamps: one per join, plus one extra at each of the two corners.
- Stays: Standard bracing on the sides, and Reinforced on the front because it faces the street.
You do not need to work out the feet, clamps and stays yourself. Draw the same line on the quote, and the plan shows the gates and bracing on the line before you pay.
Measure the line, not the block
The most common sizing mistake is measuring the whole block when you only need to fence part of it. Measure the line you want to secure. That might be the full boundary, a single frontage, or a section around a hazard such as an excavation.
For a full walk-through of counting panels, including uneven ground and mistakes to avoid, see how many temporary fence panels you need.
Frequently asked questions
What size is a standard temporary fence panel in Adelaide?
BoltHire panels are 2.4 metres wide and 2.1 metres high. Other suppliers may use different sizes, so check the width before you count panels from someone else's numbers.
How many feet does a temporary fence need?
One foot at every join between panels, plus one at each open end of the line. A straight run of 10 panels stands on 11 feet. A fully closed fence uses one foot per join.
How many clamps do I need for temporary fencing?
One clamp at every join between two panels, and one extra at each corner. The installer fits them; you do not order them separately.
How often do temporary fence stays go in?
About every 6 panels with Standard bracing, and about every 3 panels with Reinforced bracing. You choose the bracing for each side when you draw the line on the map.
How wide is a temporary fence gate?
Both the pedestrian gate and the vehicle gate take the space of two panels, 4.8 metres of the fence line.
In short
A temporary fence panel is 2.4 metres wide and 2.1 metres high. Feet, clamps and stays follow from the number of panels and corners, and the bracing level you choose for each side. To see the full count and the installed price for your site, draw the line on the quote or start from the temporary fencing hire page.
Done reading? Put a number on it.
Draw the line and see the installed price.

