Skip to content

How to Secure a Vacant Block in Adelaide

Fencing a vacant block or an empty building in Adelaide: what councils can order, how to plan the line, and the checks that keep it secure.

Temporary mesh fencing around a cleared vacant block on a suburban Adelaide street

BoltHire Team

The first step in securing a vacant block or an empty building in Adelaide is a continuous fence line with a lockable gate, checked regularly. A fence keeps people off a site that has no one on it, marks where the public stops, and is the measure a council looks for when land becomes a hazard. This article covers vacant land, cleared lots waiting for a build, and empty houses or commercial buildings between tenants or before demolition. It does not cover active building sites, which have their own fencing rules.

Why vacant property needs a fence

An empty site is a different problem from a busy one. Nobody is there to notice a gap, a pile of rubbish, or someone who should not be inside. In South Australia, two pieces of law give councils power over land and buildings that become unsafe.

  • Hazards next to a public place. Section 254 of the Local Government Act 1999 lets a council order an owner or occupier to fence, empty, drain, fill or cover land, including land with a building on it, where a hazard is, or is likely to become, a danger to the public.
  • Unsafe buildings and excavations. Section 155 of the Planning, Development and Infrastructure Act 2016 lets an authorised officer order an owner to carry out work where the condition of a building or excavation threatens safety. In an urgent case the order can be given orally.
  • The council can step in. Under section 155, if the owner does not do the work, the council can carry it out and recover the cost from the owner.
  • A fence is a visible measure. Councils look at whether the public can get to the hazard. A continuous line with a closed gate is the simplest way to show that they cannot.
  • Insurance can have its own rules. Some property policies have conditions for buildings left empty. Read your policy, or ask your insurer, before the property goes vacant.

Common reasons a property sits empty

  • A cleared block waiting for plans, approvals or a builder's start date.
  • A house waiting for demolition, after the owners have moved out.
  • A commercial building between tenants.
  • A deceased estate waiting for sale.
  • A property damaged by storm or fire, waiting for repairs or an insurance decision.

Each one can last longer than planned. Approvals take time, builders' schedules move, and a settlement can be pushed back. Plan the fence for the likely period, then extend it if the wait runs on.

Planning the fence line

Go around the whole hazard

Fence the area that needs protecting, not just the street frontage. On a cleared block, that usually means the frontage and any side that opens onto a laneway, a reserve or a neighbour's driveway. On an empty building, it can mean the building and the yard around it, or just the dangerous part, such as an open excavation, a pool, or a damaged wall.

Where the boundary already has a sound permanent fence, the temporary line can tie into it. Where the old fence is broken or missing, the temporary line closes that gap.

Keep the line on your own land if you can

A line inside the property boundary is simpler. If the fence has to sit on the footpath or road reserve, that generally needs council approval and a plan for pedestrians. Our guide to council permits for temporary fencing in SA explains when.

A locked pedestrian gate in a temporary fence line around an empty house

One gate, and decide who holds the key

A vacant site needs access for the owner, the agent, a valuer, a surveyor or a builder. One pedestrian gate is usually enough. Add a vehicle gate only if a truck or a machine has to get in. Decide how the gate will be secured and who holds the key before the fence goes up, so the gate is not left on a latch for the first visitor.

Think about wind before you add cloth

Shade cloth or a printed banner hides the site from the street and can carry the agent's or builder's details. It also catches wind. Our mesh panels are 2.1 metres high with one foot and clamp set per panel, and the planner adds wind bracing automatically. If you add shade cloth or a banner, the bracing changes with it. Our temporary fence wind rating guide explains why.

Keeping it secure once it is up

A fence that nobody checks slowly stops working. Agree who checks the site and how often, and write it down.

  • Walk the line. Look for lifted panels, missing clamps, feet pushed out of place, or a panel pulled aside to make a way in.
  • Check the gate. Is it closed and secured? Has anyone forced it?
  • Look over the fence. New rubbish, a broken window, or signs that someone has been inside all mean the fence alone is not enough.
  • Clear anything climbable. Bins, pallets or rubble stacked against the outside of the line turn into steps.
  • Recheck after storms. Strong wind is the most common reason a fence moves.

Write down what you found and the date. If a council or an insurer asks later what was done to secure the property, a short log answers the question.

If a panel is damaged or goes missing

Our hire comes with a damage waiver for ordinary wear. A card stored with Stripe covers panels that are damaged, lost or not returned. There is no separate cash bond. If something looks wrong, tell our team, so the line can be put right.

How long to hire for

Most vacant properties are waiting for a decision or a date. Our fencing is hired by the week, from a single week to a full build, and longer hires step down into term bands. Start with the period you expect, then extend from the order page if the wait runs on. The new off-hire date shows before you confirm. Our article on how long to hire temporary fencing goes through the timing.

If the empty building is coming down, the same fence often stays for the demolition. See demolition site fencing for what changes once the machines arrive.

Frequently asked questions

Can the council make me fence my vacant land?

Section 254 of the Local Government Act 1999 lets a council order an owner or occupier to fence land, including land with a building on it, where a hazard is or is likely to become a danger to the public. Councils decide case by case, so ask yours if you are unsure.

Is a temporary fence enough to secure an empty house?

A fence stops casual access and shows where the public stops. It does not lock the doors or windows. For an empty house, secure the building itself as well, and check both regularly.

Do I need council approval to put a fence around my vacant block?

Keeping the line inside your boundary avoids the footpath approval step. Occupying the footpath or road reserve generally needs council approval and a plan for pedestrians.

Who should check the fence while the property is empty?

Whoever is responsible for the property, often the owner, the property manager or the builder waiting to start. Agree on one person and a regular routine, and recheck after strong winds.

In short

An empty property needs a continuous fence, one secured gate, and someone who checks it. Plan the line around the whole hazard, keep it on your own land if you can, and extend the hire if the wait runs long. Draw the line in our quote tool to see the installed price, or read more about temporary fencing hire in Adelaide.

Done reading? Put a number on it.

Draw the line and see the installed price.

See your price