Skip to content

How Many Crowd Control Barriers Do I Need?

Planning an Adelaide event? Learn how to work out how many crowd control barriers you need, where to place them, and how to hire the right number fast.

A line of interlocking steel crowd-control barriers on dry grass

BoltHire Team

Whether you are running a street festival, a race, a market, a concert or a community fun run, crowd control barriers do quiet but critical work: they define where people walk, keep crowds back from roads and stages, and create clean queues and controlled entry points. The planning question is always the same — how many crowd control barriers do I need, and where do they go? This guide gives you a practical method you can apply to any Adelaide event.

What crowd control barriers actually do at an event

Before counting, be clear on the job each barrier is doing, because different jobs need different densities of barrier.

  • Edge protection and separation — keeping the public away from a road, a drop, a waterway, machinery or a performance area.
  • Queue management — channelling people into orderly lines at entries, bars, food stalls or ticketing.
  • Perimeter and access control — defining the event boundary and funnelling everyone through a controlled gate.
  • Pedestrian rerouting — guiding foot traffic around a closed footpath, roadworks or a hazard.

A standard interlocking crowd control barrier is roughly 2.2 to 2.5 metres long. As with fence panels, that length is the number you build your count from — but the placement logic is different for each of the jobs above.

A simple method to estimate your barrier count

Step 1: Mark every line that needs a barrier

On a site map (or a quick hand sketch), draw every line where you need separation: the crowd-facing edge of the stage, the road frontage, the queue lanes, the event perimeter. Don't count yet — just mark the lines.

Step 2: Measure each line and divide by barrier length

For each marked line, measure its length in metres and divide by the barrier length. Using 2.3 metres as a working average:

Barriers for a line ≈ line length in metres ÷ 2.3

A 30 metre stage-front barrier is roughly 30 ÷ 2.3 ≈ 14 barriers. Do this for every line and add them together.

Step 3: Add barriers for corners, gates and overlaps

Just like fencing, every corner and controlled gate costs you a little. Add one barrier per significant corner, and remember that each entry gate is a gap you may need to manage with a swing section or staffed opening rather than a fixed barrier.

Step 4: Add a contingency

Events move. Stalls shift, crowds flow in unexpected directions, and councils or police sometimes ask for extra separation on the day. A contingency of around 10 percent on top of your calculated number is sensible for anything with a real crowd.

A worked example

Imagine a small street market:

  • Perimeter you need to define: 80 metres → 80 ÷ 2.3 ≈ 35 barriers.
  • Two queue lanes at the entry, 10 metres each: 20 ÷ 2.3 ≈ 9 barriers.
  • Corners around the perimeter: add 4.
  • Contingency (~10%): add 5.

Total ≈ 53 crowd control barriers. That is an estimate you can budget against — the exact number depends on your final layout.

Interlocking crowd-control barriers forming a corner on dry grass

Placement tips that prevent problems

  • Controlled entry beats open edges. Fewer, well-staffed gates are safer and easier than many small gaps.
  • Keep barriers off the road unless they're rated for it. Separating pedestrians from live traffic is a different, higher-stakes job than defining a market edge — confirm the requirement with your traffic management plan.
  • Mind the wind. If you attach event banners or scrim to barriers, they catch wind just like shade cloth on a fence, and the run needs bracing or ballast to stay put.
  • Think about sightlines and accessibility. Leave accessible entry points and keep emergency egress clear — this is often a licensing condition, not an optional nicety.

Permits, licensing and compliance

Public events in South Australia frequently require a traffic management plan, council approval and sometimes police sign-off, especially where roads or footpaths are affected. Crowd control barriers are usually a named part of that plan. Sort your approvals early, because the approved layout often dictates exactly how many barriers you need and where — which means the compliance step and the counting step are really the same step.

Matching barrier density to the type of event

The same length of line can need very different numbers of barriers depending on the crowd. It helps to think in three broad tiers.

Low-pressure crowds — a relaxed market, a community open day, a school fair. People aren't pushing against the line, so a single run of interlocked barriers defining the space is usually enough. Your metre-divided estimate holds with little extra.

Moderate-pressure crowds — a popular food event, a parade route, a ticketed gate. People lean, queue and occasionally surge toward entries and attractions. Here you reinforce the pressure points: double up around gates, add barriers where queues bunch, and keep staff at the openings.

High-pressure crowds — a concert front-of-stage, a finish line, anywhere a crowd moves as one. This is specialist territory with specific separation and egress requirements, often set by police or a licensed crowd-management plan. Don't estimate these from a blog — build the count from the approved plan, because the layout is a safety-critical decision, not a budgeting one.

Knowing which tier your event sits in before you count stops you both under-ordering at the gate and over-ordering along the quiet edges.

The faster way to get the number right

Estimating by hand is enough for early budgeting. For the real number, talk to our team: crowd control barriers are quoted to the venue plan, the bump-in and bump-out windows and the crowd numbers. If the job is a site fence line, you can price that yourself: draw it and the installed price is on the screen.

Frequently asked questions

How long is a standard crowd control barrier?

Most interlocking pedestrian barriers are around 2.2 to 2.5 metres long. Divide the length of each line you need to control by roughly 2.3 metres to estimate the count.

What's the difference between crowd control barriers and temporary fencing?

Crowd control barriers are lighter, interlocking and designed for pedestrian management and quick reconfiguration at events. Temporary site fencing is taller mesh for securing construction sites. Use the one that matches the job — they are priced differently.

Do I need a permit for crowd control barriers at an Adelaide event?

Often yes. Public events affecting roads or footpaths usually need council approval and a traffic management plan, which typically specifies barrier placement. Check with your local council early.

How far in advance should I book event barriers?

As early as your layout is settled, and especially for busy periods and weekends. Confirming your approved plan first means you book the right quantity once rather than scrambling to add more.

Can I get a price without a phone call?

Yes. Email our team the layout, the dates and the expected crowd, and the setup comes back with a price. A temporary site fence line you can price online, any hour.

In short

To work out how many crowd control barriers you need, mark every line that needs separation, divide each by about 2.3 metres, add for corners and gates, and keep a contingency. Settle your approved layout first, then send it to our team for the setup and the price.

Done reading? Put a number on it.

Draw the line and see the installed price.

See your price